If your inflatable PFD's Carbon Dioxide (CO2) cartridge has been used during inflation, your PFD will need to be re-armed, meaning a new CO2 cartridge will need to be installed into the inflator mechanism. The videos listed below provide instructions on re-arming your PFD, based on the PFD type you have. You will need to purchase a re-arm kit from your local dealer to complete the installation.
MIT 150 CONVERTIBLE A/M PFD RE-ARM INSTRUCTIONS
MIT 100 CONVERTIBLE A/M PFD RE-ARM INSTRUCTIONS
HIT HYDROSTATIC RE-ARM INSTRUCTIONS
ELITE 28 HYDROSTATIC RE-ARM INSTRUCTIONS
ELITE 38 HYDROSTATIC RE-ARM INSTRUCTIONS
EP 38 HYDROSTATIC RE-ARM INSTRUCTIONS
MIT 100 & 70 AUTOMATIC RE-ARM INSTRUCTIONS
MIT 100 & 70 MANUAL RE-ARM INSTRUCTIONS
M.I.T. 100 AUTOMATIC RE-ARM INSTRUCTIONS
DELUXE AUTOMATIC RE-ARM INSTRUCTIONS
DELUXE MANUAL RE-ARM INSTRUCTIONS
M.I.T. 35 MODEL # MD2010 RE-ARM INSTRUCTIONS
MD3071 AND MD3075 BELT PACK RE-ARM INSTRUCTIONS
RESCUE STICK RE-ARM INSTRUCTIONS
